TLG type steel towline can carry a number, weight, cables and tubing free suspension (allow do not support round) Length, the support plate according to the care of the customers need to produce for machine tools, mobile machinery and other bending radius 50-600mm, chain plate height of 35-150mm 
 Can be arbitrarily chosen. 


 TLG type steel towline of its use to travel up to 32 meters applies to all transmission mode can be lengthened and shortened. In addition, 
 By changing the pin to change the bending radius. 


 The towline of the support plate width from 150mm to 600mm, reasonable interval between the hole and the hole is 5mm. 


 The height of the chain plate, support plate height, maximum diameter of the cable. Decision, when the operation of machine tools to maximize, such as the width of the towline of more than 300mm, the length of the towline of more than 4m out of stability reasons, you should consider choosing to increase the towline of the One specifications. 


 Bending radius according to the maximum diameter of the cable select and should reach 10 times the diameter of the cable bending radius according to the table to select the 50-600mm and a small stroke may be to choose a smaller radius. 


 Towline long = 1/2 trip +4 bending radius, this only applies to the fixed link is the midpoint of the trip. 


 The towline fixed according to the location of the machine tool selection. Fixed angle on the peripheral or inner or external in the towline, the general links section in the towline, while outward weeks.